Product Manual

15
6. Guide the rod holder closer to the stake position and re-
shoot. You can re-shoot as many times as necessary until
the rod is within an acceptable range of the correct
position. Tap Stk> when an acceptable position is
established.
7. Tap Store & Next Pt to store the position of the rod holder
and to go back to the Define Stake Point screen from which
you can select the next point you want to stake.
Stakeout Using a
Reference Line
1. When everything is set up correctly (see Station Setup on
page 11), tap Line from the Layout menu.
2. Select two points for the reference line on the Layout Pro
display.
3. Tap Next. Layout Pro calculates the distance between the
two points you selected. The Flip button can be used to
reverse the definition of the reference line (AB or BA)
4. Tap Next. You can choose between Stake Out Points and
Show Position (see screen below).