Computer Accessories User Manual

Chapter 2. Troubleshooting the RXT150

Using the Force Eject Utility

1. Log in to the RLC as a user with Administrative privileges.

2. Select Maintenance > Tools. The RXT Utilities screen appears (Figure 2-1).

3. Select Load/Unload Media Pack. The screen refreshes to show the details of the

utility (Figure 2-1).

4. Select Unload RXT Media pack, then select force.

5. Select Run.

• If this operation is successful, the RXT media pack ejects from the RXT150,

and the Load/Unload RXT Media Pack screen appears, confirming that the

pack is not longer loaded.

• If this operation is not successful, the RLC presents an error. Proceed to

Holding the Load/Unload Button on page 10.

6. Select Finish to complete the operation.

Figure 2-1 The RXT Utilities screen, showing the Load/Unload RXT Media Pack utility.