User Manual
RS9803ELC2-WWVB USER’S MANUAL
Ⅰ. Features
1. Weather forecast for 4 states: sunny, partly cloudy, cloudy, rainy
2. Seven function keys: MODE, °C/°F, UP/ALARM ON/OFF,
DOWN/TIME ZONE, MAX/MIN, CHANNEL,SNOOZE/LIGHT
3. Alarm and snooze
4. Indoor temperature and humidity
5. Outdoor temperature/ humidity with RF: up to 3 channels
6. Indoor/outdoor temperature and humidity max/min record
7. Key sound function
8. day of the week in 7 languages:NET,DAM,ESP,ENG,GER,FRE,ITA
9. Tolerance:temperature:+-2°C,humidity:+-8%
10. DST default: ON
Ⅱ. Main UNIT
1. Insert adaptor plug into main unit DC outlet.
2. The backlight will be on, all of the icons and the digits of the LCD will display
for 3 seconds. It then beep and enter normal state.
3. Weather forecast indicator lamp light up from Sunny to Rainy, the defaults partly
cloudy.
4. The clock/calendar defaults to AM12:00 Jan 1,2010
5. Alarm defaults to AM 12:00
6. Temperature unit defaults to degree Fahernheit (°F).
7. Time display defaults is 12 hours mode
Note: The main unit is recommended to be powered by adaptor instead of batteries.
Ⅲ. SETTING INSTRUCTIONS
3.1 Normal states
1. Hold MODE to switch time and alarm display mode
2. Hold MODE to enter into time setting
3. Click “UP/ALARM ON/OFF” or” °C/°F” to switch between °C/°F
4. Click “MAX/MIN” to switch Maximum/Minimum temperature and humidity
5. Hold “MAX/MIN” for 2 seconds to clear the history record of temperature and
humidity
6. When alarm rings, click “SNOOZE/LIGHT” to enter into the snooze state every
5 minutes
7. Click “SNOOZE/LIGHT”,the weather indicator light move a cycle
8. Press “CHANNEL” to switch RF channel, CH1 ÆCH2ÆCH3
9. Hold “CHANNEL” key for 2 seconds to clear out all data of current “Channel”
3.2 Time set
Under time display mode
1. Hold “MODE” button for 2 seconds to enter into time setting
2. With each press of the MODE button, it will advance through the following
sequence of time setting: 12/24 hour ÆHour ÆMinute Æ yearÆ MD/DM
selectableÆ monthÆ dateÆ languageÆDST(ON/OFF) Æ Exit