Installation Guide

ManualsBrandsSpectra Metals ManualsBuilding materials24 in. x 50 ft. Savannah Wicker White PVC Coated Aluminum Trim Coil

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

P.O. Box 43167

Atlanta, GA 30336

800-299-5305

Letter of Certification

.019 X 24” X 50’ – Aluminum Trim

Coil Striated PVC Trim Coil

Spectra Metal Sales, Inc. is a member of the National Coil Coating Association and uses

the NCCA’s standards as guidelines for physical testing.

• The aluminum used is alloy 3105-H28 or 3105-H25 which meets the specifications set forth in the

“Al

uminum Standards and Data 2006” published by the Aluminum Association. The gauge of th

uminum for this coil is .019, +/

- .002.

• The surface of the alum

inum sheet is thoroughly cleaned and dries to remove im

purities and coated

with Bonderite 1402-W non-cyanide chromate conversion coating.

• Th

e Aluminum’s inside coating is a thermo setting PVC (Poly Vinyl Chloride) paint which is ro

coat

ed and baked per manufactures specifications. The inside coating is a thermo polyester paint

which is roll coated and baked per manufactures specificati

ons.

• The DFT range of the applied finish is .8 m

ils, +/- .2 m

ils.

Spectra Metal Sales, Inc. has a complete line of state of the art quality control

equipment which includes:

Hunter DP-9000 Color meter

Garner Impact Tester

Garner Cross Hatch Tester

Fischer Dual Scope Film Thickness Gauge

Gardner Gloss Meter

• The paint specifications used for our Striated PVC coated trim

coil are as follows:

Pri

mer Thickness: .15 +/- .05 mils

PVC Thickness: 12 – 14 grams per square foot (3.5 +/-.1 mils)

Gloss (60’): 27 +/- 3 Units

Flexibility: .019 (+/-.003) 2 T Bend minimum

Impact (N.T.O.): 1-1/2

Times metal thickness in Inch-Lbs (ASTM D 2794)

Pencil Hardness: B - H

Humidity Resistance: No blistering, loss of adhesion or discoloration after 2,000 hours

exposure to 100% relative humidity.(ASTM D 2247)

Salt Spray Resistance: No field blistering and no more than 1/16” creep from a score line

after neutral salt spray testing for 2,000 Hours (ASTM B 117)

Weathering Resistance: Will withstand ten years outdoor southern exposure in South

Florida, without cracking, blistering, splitting or pealing.

Summary of content (1 pages)

PAGE 1
.. .. .. .. . P.O. Box 43167 Atlanta, GA 30336 800-299-5305 Letter of Certification .019 X 24” X 50’ – Aluminum Trim Coil Striated PVC Trim Coil Spectra Metal Sales, Inc. is a member of the National Coil Coating Association and uses the NCCA’s standards as guidelines for physical testing. • The aluminum used is alloy 3105-H28 or 3105-H25 which meets the specifications set forth in the “Aluminum Standards and Data 2006” published by the Aluminum Association. The gauge of the Aluminum for this coil is .