Product Manual

English
9
• Red: SBAS constellation:
– Dark-red: Satellites used
– Light-red: Satellites not used
In the lower part of the screen, you can read the number of
currently tracked satellites and the number of satellites
currently used.
The POSITION INFORMATION view ([2]) provides the following
information, from top to bottom:
• MobileMapper 300 Bluetooth identifier
• Horizontal coordinates of current position
• Vertical coordinate of current position
• Geoidal separation (vertical distance between datum used
and geoid used)
• Horizontal and vertical errors (HRMS, VRMS)
• MobileMapper 300 receiver speed, in meters/second
• Position computation mode (AUTONOMOUS, DGPS, FLOAT
RTK, FIXED RTK).
The CORRECTION INFORMATION view ([3]) provides the
following information, from top to bottom:
• Host Name or IP Address: Identification of the NTRIP, DIP
or RTX server providing the corrections used.
• Port Number: IP port number of the NTRIP, DIP or RTX
server providing the corrections used (blank for SBAS)
(the presence of a hyphen in any field means “Blank”).
• Type: Type of connection used (SBAS, NTRIP, DIP or RTX)
to let MobileMapper 300 acquire corrections.
• Mount Point: Name of mount point used in NTRIP or RTX
(blank for SBAS and DIP).
• Network: Indicates which medium (Mobile or Wi-Fi) is used
to make a network connection (blank for SBAS).
• In the same line:
– Age: Age of the corrections received, in seconds.
– Station ID: Identification number of the station (or PRN
of satellite in SBAS) providing the corrections used.
• Status: Network connection status (Connected or
Disconnected) (Blank if SBAS).