Product Manual

English
10
Receiver Battery Status
: Visual indication (see [5]) of MobileMapper 300 battery
status (may be different from your mobile device’s). White
color turns into yellow when the MobileMapper 300 battery
gets low.
If you touch this icon, you will get additional information
about the receiver power supply:
• Type: Type of power supply used by the receiver: Internal
(internal battery) or External (external power supply).
• Capacity Remaining: (For internal power supply only)
Percentage of remaining charge in the receiver battery.
Receiver Profile Status
: Touch this icon (see [6]) to read information about
Bluetooth and the receiver:
• Receiver Type: Bluetooth identifier of connected
MobileMapper 300.
• GNSS Firmware Version: MobileMapper 300 GNSS firmware
version.
• Status: Current status of Bluetooth connection.
• RTX Subscription: Provides the current status of your
subscription to the RTX service (available at a later date):
– Valid until <date>: You are currently allowed to use the
RTX service. The subscription will expire at the
specified date.
– Expired: Subscription expired. You need to renew your
subscription if you wish to resume using the RTX
service.
– Invalid: Your receiver has never been allowed to decode
RTX corrections. If you want your receiver to do so, you
need to subscribe to the RTX service (available at a
later date).
• MSL version: Software version of MobileMapper 300 Micro
Service Layer. (This piece of software is used to interface
MobileMapper 300 with your mobile device).
• RTK Option: Indicates the level of precision available from
your MobileMapper 300:
– Full RTK: Centimeter-accurate 3D position
– 7/2: Accuracy is 7 cm in horizontal and 2 cm in vertical
– 30/30: Accuracy is 30 cm in both horizontal and
vertical.