Product Manual

English
20
– Get the name of the COM port that will be used on
computer side.
– Pair the two devices through Bluetooth.
• Start WinFlash on the computer.
• Make the following choices:
– Device Type= MobileMapper 300 / ProMark 700 Receiver
– PC serial port= <computer port used>
And then click Next >:
• Select Update receiver options and then click Next >.
• Select Legacy password, copy the option code received by
email (see above), paste it into the Option Password text
box, and then click Next >, then Finish.
WinFlash starts communicating with MobileMapper 300
to activate the option. At the end of this step, the message
“The option block was modified successfully” is displayed.
• Click Exit, then Yes. This causes WinFlash to terminate.
MobileMapper 300 can now operate in the newly
activated accuracy mode.
NOTE 1: MobileMapper 300 will always try to provide the
best accuracy possible, in agreement with the installed
options and the operating environment.
NOTE 2: The warranty extension is also a firmware option.
You also need to use WinFlash to install this option.