Product Manual

English
2
MobileMapper 300 Packout
Standard
Accessories
The MobileMapper 300 packout consists of the following
items:
• [1]: MobileMapper 300 GNSS receiver
• [2]: Universal AC/DC adapter shipped with four different
types of input connectors.
• [3]: Power cable extension (male jack to 6-pin connector)
• [4]: Vehicle power cable (cigarette lighter connector type
to female jack)
• [5]: Soft transport bag.
• + MobileMapper 300 Quick Start Guide (not shown)
Optional Accessories
Two brackets for 7” or 10” tablets.
Cable Kit P/N 91865-00 (see picture). This kit is used to
establish a USB connection between the MobileMapper 300
and a computer. This connection is required for upgrading the
GNSS firmware when the computer has no Bluetooth.
Because the process takes 15-20 minutes, the
MobileMapper 300 should always be connected to external
power when updating firmware.
The optional cable kit therefore consists of:
•
A V-shaped cable terminated with a DB9-f connector. One
of its other ends is fitted with a female jack, for connection
to a power source, and the other with a 6-pin circular
connector for connection to the MobileMapper 300
.
• A short cable extension (USB to DB9-m), to be used
between the computer (USB port) and the V-shaped cable
(SubD-9m).
[1]
[2]
[3]
[4]
[5]