Product Manual

Manual Spot Search Mode (only DG813) - The Spot Search mode is used for pipe laying by

detecting the beam manually using the Spot Finder SF803 and can be activated in automatic and manual

mode.

Using the “Over the Top” application, the Spot Finder detects the fan beam while the remote control’s display

provides the information to position the pipe correctly at the required direction and elevation.

Press and release the M button at the standard display and select Spot Search using the (+)/(-) and left/right

buttons.

Press/release button M  escape/return to the standard display.

Pressing and releasing E button starts the manual Spot Search mode while the beam becomes a rotating fan

beam.

The empty SF symbol indicates the Spot Search mode has been activated.

A black block at the SF symbol indicates the beam position at the Spot finder and gives the direction for

finding the center of the beam. Two black blocks on top or the bottom of the SF symbol confirm the correct

direction.

4 black blocks at the SF symbol confirm the Spot Finder has been adjusted to the center of the beam which

means the pipe is placed correctly.

Manual Spot Search can be exited any time

by pressing and releasing ESC button.