Owner's manual

English
17
• Tap on Search for Networks to turn on Wi-Fi and start
searching for the networks that are available from your
location.
• Choose one, then follow the instructions until you are
given access to the Internet.
GSM/GPRS Module
Provided the appropriate SIM card has previoulsy been
inserted in the battery compartment, the GSM/GPRS modem
allows you to:
• Make a phone call (modem used in GSM mode)
• Establish an Internet connection (modem used in GPRS
mode).
Motion Sensor Enabling Automatic Screen Rotation
By default, the receiver screen is used in portrait format.
Rotating the receiver by 90° will not cause the screen format
to switch to landscape format.
Operating the receiver this way is usually what you expect
from your receiver because you need to keep it always in
portrait position, with an angle of 45° for best satellite
reception.
You can however ask the receiver to rotate the display
automatically, depending on the position you give to the
receiver.
• Press the Windows key and tap successively on Settings,
System and Motion Sensor.
• Tap on the switch tab
• Enable the Screen rotation function. Using the Sensitivity
cursor, you can also adjust the sensitivity with which the
receiver will react to motion.
•Tap OK to validate all your settings.
Disabling Automatic Screen Rotation
Just before disabling the Screen rotation function (see above),
make sure the current screen format (portrait or landscape) is
the one you wish to use. If it’s not, first rotate the receiver
accordingly so you get this screen format, and then you can
disable the Screen rotation function.