Owner's manual

English

Scrolling through Your Picture Gallery

By setting the motion sensor as a switch, you can easily go

through all your pictures or audio files, just using the hand

that holds the receiver, leaving your other hand free.

After you have opened the MyPictures folder for example and

tapped on the first picture to view it, you just need to shake

the receiver briefly to view the next one, and so forth until all

the pictures in the folder have been viewed.

To set the motion sensor as a switch:

• Press the Windows key and tap successively on Settings,

System and Motion Sensor.

• Tap on the switch tab

• Enable the Switch songs or pictures function and tap OK.

Fall Alarm

You may set the receiver to produce a sound alarm when it

falls down:

• Press the Windows key and tap successively on Settings,

System and Motion Sensor.

• Tap on the Fall Alarm tab

• Enable the Fall Alarm function and tap OK.

Using the Camera Taking a Picture

• Press the Windows key and tap Pictures & Videos. This

opens the “My Pictures” folder in which you can see the

list of existing images and videos. The first item in the list

is the Camera, the tool you will now be using to take

pictures. The light-blue background means the camera is

currently selected.

•Tap Camera, or press the Enter button, to turn on the

camera. Wait a couple of seconds until the center of the

window displays the viewfinder of the camera.

• Now use the receiver as a camera. Look at the viewfinder

to frame the picture you want to take.

• When you are ready, stay as still as possible and press the

Enter button to take the picture. When you hear the click

of the camera, stay still for another two seconds until the

screen displays the picture you have just taken.

•Tap OK to come back to the viewfinder, then tap anywhere

on the screen to re-activate the task bar a the bottom of

the screen.