User Manual

English

GNSS Toolbox

GNSS Toolbox is a software application that is separate from

MobileMapper Field. It is used to control and monitor GNSS

reception in MobileMapper 6.

From the Start screen, tap on the GNSS Tool Box icon or tap

on GNSS Tool Box on the Today screen. This opens the tool

box main menu in which four options are listed:

• GNSS Settings

•GNSS Status

• Reset

• About

GNSS Settings

•Open the GNSS Tool Box and double-tap on GNSS Settings.

This opens a new window where you can make the

following settings:

– Tracking mode: Only GPS L1 is available with

MobileMapper 6.

– Use SBAS check box: Check this box to enable SBAS

reception. When this box is cleared, SBAS reception is

disabled.

• Tap ok to confirm your choices and return to the GNSS

Tool box main menu.

GNSS Status •Open the GNSS Tool Box and double-tap on GNSS Status.

This opens a three-tab window.

The default Position tab shows the three coordinates of the

current position, as computed by the receiver, as well the

number of satellites used, the current PDOP value and the

position computation mode used.