Manual

English
3
System Components Overview
The tables below provide an overview of the different key
items composing the ProFlex 800. The list of items is
intentionally limited to those more particularly required to
operate a temporary base, and a rover in backpack
configuration. The complete list of items is provided in the
ProFlex 800 Reference Manual.
Depending on your purchase and based on the type of survey
you wish to perform, you may only have some of the listed
items. Please refer to the packing list for an accurate
description of the equipment that has been delivered to you.
Spectra Precision reserves the right to make changes to the
items listed below without prior notice.
ProFlex 800
Basic Supply
Item Part Number Picture
ProFlex 800 Basic: ProFlex 800 L1/L2 GPS
Receiver with standard accessories:
• 1 x Li-Ion rechargeable battery pack
• AC/DC power supply kit
• USB cable, host to device, 20 cm
• Serial interface cable
• Ethernet cable
• Bluetooth antenna
• Cellular antenna
• 2-Hz update rate
• Transport bag
• Dual-frequency tracking [P]
• Limited RTK [L]
– No limitation in base mode
– Baseline limited to 3 km in rover mode
– All protocols available: RTCM-2.3, RTCM3,
CMR/CMR+, ATOM
(+ DBEN and LRK in rover mode)
990658-ASH
ProFlex 800 Basic (above) + ADL Foundation
radio (internal transceiver TRx 430-470 MHz)
NOTE: UHF antenna not included in this part
number but available as a separate item.
990658-30-
ASH