Manual

Clicking in a row inside the table allows you to edit the

session individually. The changes are then entered by

clicking on the Manual Set button

Note that the Use button is checked by default, which

means data recording is allowed during the session.

Starting Sessions

& Managing Raw

Data Files

To start the execution of the programmed sessions on the

current day, do the following:

• Click on Sessions - Settings

• Enable the Run Sessions check box.

• Keep default values for Reference Day (“1”), Offset Per Day

(“00:00”) and Recording and Output Elevation Mask (5°).

• Choose the storage medium. “Internal Memory” is about

95 Mbytes in size. Using an external device connected to

the receiver’s USB port (“USB Device”) may allow the

receiver to operate with an even larger memory.