Instruction Manual

Select the desired source by simply clicking on the

corresponding row. The resulting mount point then

appears in the Mount Point field located above the Load

Source Table button.

– Send NMEA: Check this button when the rover operates

in a VRS network so that it can return its position to the

network through an NMEA message. Keep it cleared in

all other cases. (This option is automatically enabled

when you select a mount point for which the NMEA

message is requested.)

• At the bottom of the page, in the Differential Port pane,

select the Automatic option to let the receiver detect the

incoming differential stream automatically.

NOTE: Automatic is the recommended choice for the

Differential Port setting because in this case, you don’t

need to define the ports receiving the two possible

differential streams.

• Click on the Configure button to let the Web Server load all

your new parameters to the receiver. You just have now to

define the output messages (see Defining Output

Messages on page 30).

RTK Corrections

Received on Port

A, B or F

RTK Corrections

A, B , F

ProFlex 800