Instruction Manual

42
Parameters on page 35. Then proceed with the steps
below.
• Scroll down the page to display the Transmitter frame. In
the Message field, select the type of differential data the
base will generate and the radio will transmit (ATOM,
RTCM, CMR, CMR+ or DBEN). Following your selection,
you will see the detail of the selected data on the right of
this field, as defined in Data Output > Differential Messages.
•In the Device field, select the type of the radio transmitter
the base is using (the internal or an external one).
Depending on the type of radio used, you will have to
provide the following parameters to complete the
configuration of the radio.
Note that the Load Transmitter Settings button is used to
read the current setting of the radio. The changes you
U-Link TRx
Magellan
UHF
PDL HPB/
LPB
ARF7474B
EU
ARF7474A
NA
ADL Vantage/
Vantage Pro
ADL
Foundation
Port A, B, F A A, B, F A, B, F A, B, F A, B, F D
Baud Rate
1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200,
38400
1200, 2400,
4800, 9600,
19200, 38400
NA
Mode
RS232,
RS422
RS232,
RS422
RS232,
RS422
RS232,
RS422
RS232,
RS422
RS232,
RS422
NA
Protocol
Transpar-
ent, DSNP
NA
Transpar-
ent, Trimtalk
NA NA
Transparent,
Trimtalk 450S,
SATEL, Trim-
MarkII/IIe,
TT450S,
TRIMMARK3,
Transparent
FST, U-Link
Transparent,
Trimtalk 450S,
SATEL, Trim-
MarkII/IIe,
TT450S,
TRIMMARK3,
Transparent
FST, U-Link
Channel 0-15 0-15 0-15 0-2 NA 1-32 1-32
Air Link
Speed
4800, 7600,
9600
NA
4800, 9600,
19200
NA NA
4800, 8000,
9600, 16000,
19200
4800, 8000,
9600, 16000,
19200
RTS/CTS NA NA On/Off On/Off On/Off On/Off -
Scrambler NA NA On/Off NA NA On/Off On/Off
FEC NA NA On/Off NA NA On/Off On/Off
Current
Power (W)
NA NA NA NA NA 0.1, 0.5, 1, 2, 4 0.1, 0.5, 1
Load
Transmit-
ter Settings
button
Yes Yes Yes Yes No Yes No