Manual

English

First-Time Use

Unpacking Open the receiver box and unpack the following items:

• Receiver

• SD card containing required applications (GNSS Toolbox,

GNSS Service, etc.)

• Battery

• Docking station

• Universal AC adapter

•USB cable

Inserting the

Battery Into the

Receiver

Follow the instructions below:

• Turn over the receiver and rotate the finger screw counter-

clockwise a quarter turn and pull the trap door open.

• Insert the battery as shown. The label must be outwards

and the right way up.

• Put the trap door back into place by first inserting the two

clips located at the top of the trap door.

• Then push the door against the case and rotate the finger

screw clockwise by one-quarter turn for a secure and

sealed closure.