Product Manual

20
Caring for Your Unit
Mechanical shock
The unit is designed to resist damage for drops up to 4 ft (1.22
meters). However, you should protect the display from impact,
pressure, or abrasive substances that can scratch it or crack it. The
unit should not be dropped unnecessarily
.
Cleaning the unit
Clean the unit with a soft cloth dampened with either water or a
diluted mild detergent. If a mild detergent is used, rinse with
water to ensure all residue is removed. Do not use any chemical
cleaners and do not put the unit in the dishwasher.
Care of the touchscreen
Use only the included stylus or other devices specifically designed
for use with touchscreens. The use of ballpoint pens, nails or other
sharp objects to operate the touchscreen will scratch and/or damage
the unit. Keep the touchscreen clean by gently wiping the display,
using a soft cloth dampened either with clean water or glass cleaner.
Do not use abrasive cleaners or apply any cleaner directly to the
display. Doing so may void your warranty.
Use the screen protectors included with the unit to keep the
touchscreen clean and protected. To apply a screen protector, first
clean the display thoroughly. Peel the backing from the screen
protector. Align the edge, and then drop the remainder onto the
display. Use a credit card, if necessary, to squeeze the air from
underneath the screen protector.
Case Vent Hole
A GoreTex membrane is used at the vent
hole to equalize the atmospheric pressure
within the unit and to prevent dust, water,
etc. from entering. This vent must remain
clear of any obstruction. Damage to the touchscreen will occur if
the vent is covered. Covering the vent with stickers and labels may
void the warranty.