Reference Manual User Manual

GPS Reference Manual

RTK Configurations

The RTK Configurations Settings card is used to configure automatic

connection when RTK base and rover receivers need to use different

COM ports and settings.

Auto connect RTK with saved configuration

: is where

you turn on the automatic connection function. When

selected, this feature will switch to the receiver brand

and model and set the port settings to the saved

configuration.

Base

: Displays the brand and model of the saved base

receiver configuration.

Connect Using

: Displays the COM port settings for the

saved base receiver configuration.

: Saves the current

receiver and COM port settings as the RTK base. This

receiver will automatically be set when you tap Base

Setup in Survey Pro.

Rover

: Displays the brand and model of the saved rover

receiver configuration.

: Saves the current receiver and

COM port settings as the RTK rover. This receiver will automatically

be set when you tap Rover Setup in Survey Pro.

Note: If you need to connect to a receiver different than the saved

configuration, you can un-check the Auto Connect control.