User Manual Owner's manual

User’s Manual – GPS Mode
308
4. The final screen displays the current
connection and allows you to switch
between Bluetooth and Serial if
possible. If a particular Bluetooth
receiver was not detected, it will
automatically be configured to connect
with a serial cable. Tap Finish to
complete the wizard.
RTK Data Modem Configuration
This section explains how to configure the type of data link to use
between the base and rover. This is either base to rover RTK GPS
using a radio modem, or Internet delivered base corrections using a
cellular phone as a data modem.
Using a Radio Modem
Using a radio modem as the data link from base to rover is the most
common configuration.
1. Select Base/Rover Radio RTK.
2. The Use CMR Station Index should be
checked in situations where more than
one base is in range of the rover,
allowing it to distinguish one from the
other. Enter a unique value from 0-31
in the corresponding field.