Reference Manual User guide

Stakeout Menu – GPS & Basic GPS Module
R-343
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See Page R-287 for details.
Stake to Line – Screen Two
The second screen is where measurements take place
and the staking directions are displayed. The graphic
and display direct you to points on line via the shortest
route, a perpendicular offset from the rover to the line.
The graphic display will change depending on how close
you are to the specified line. The chart below illustrates
each screen type.
Note: Tap the graphic portion of the screen for an expanded view.
GPS Status: displays the current solution type, the number of
satellites used, and the horizontal and vertical precision computed by
Rover is greater than
3 m (10 ft) from the
line.
Rover is between 0.3
and 3 m (1 and 10 ft)
from the line.
Rover is within 0.3 m
(1 ft) of the line
Rover is on the line
or within the
Horizontal Distance
Tolerance specified
in the Stakeout
Settings screen.