This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device does not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. SAFETY INFORMATION Your wireless handheld portable transceiver contains a low power transmitter. When the Push-to-talk (PTT) button is pushed it sends out radio frequency (RF) signals.
PRECAUTIONS DURING OPERATION WARNING • • • • • • • Never apply any DC power to the battery terminals. Do not attempt to charge any non-rechargeable batteries. Do not attempt to open the unit case. No user serviceable parts inside. Refer servicing to qualified service personnel. Do not modify or attempt to adjust the transceiver for any reason. Avoid extremes in exposure to water, heat and cold. This transceiver is weather resistant but not waterproof.
FEATURES • • • • • • • • • • Range: Up to 2 Miles 22 Channels Multifunction LCD Display Auto Squelch Control Auto Power Saver Mode Talk Confirmation Tone/Roger Beep Call Function Monitor Function Low Battery Alert Removable Belt Clip UNPACKING Carefully unpack and identify the items listed below before discard the packing materials. • Two KT2020 FRS Radios • Instructional Manual & Warranty Card. CONTROLS AND INDICATORS 1. Antenna 2. Call Button 3. Push-To-Talk (PTT) Button 4. Menu Button 5.
CHANNEL SPECIFICATION Channel 1 2 3 4 5 6 7 8 9 10 11 Frequencies (MHz) 462.5625 462.5875 462.6125 462.6375 462.6625 462.6875 462.7125 467.5625 467.5875 467.6125 467.6375 Channel 12 13 14 15 16 17 18 19 20 21 22 Frequencies ( MHz) 467.6625 467.6875 467.7125 462.5500 462.5750 462.6000 462.6250 462.6500 462.6750 462.7000 462.7250 BATTERIES INSTALLATION Each FRS Radio operates on three ‘AAA' size batteries. 1. Remove the Belt Clip (#10) by pressing on the release tab.
4. 5. 6. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the unit and will void the warranty. Do not dispose of batteries in fire, batteries may explode or leak. When the Low Battery Icon appears in the LCD Display, replace all 3 batteries with new ones. BASIC OPERATION 1. Turn on the FRS Radio by pressing until a channel number appears and a confirmation tone is heard. 2.
SCANNING CHANNELS You can use the scanning feature to monitor channels or to find someone in your group who has accidentally changed channels. 1. Press the Button twice. The Scan icon “ ” appears with “Y” or “-” flashing in the display. or until “Y” displays and press PTT to turn scanning on. 2. Press either 3. When the radio detects channel activity, it stops scanning and you can hear the transmission. Press PTT to respond within 5 seconds. 4.
REVELANT GUIDELINES AND STANDARDS 1. Technical Regulations of Part 15 and 95 of the FCC Rules. 2. Type Acceptance Requirements of Part 2 of the 47CFR Regulations. CARE AND SAFETY To assure optimal radio performance and to ensure RF energy exposure is within the guidelines of the above standards, the following operating procedures should be observed: FOR PORTABLE 2-WAY FRS RADIOS • When transmitting with a portable radio, hold radio in a vertical position with its microphone 1-2 inches away from your mouth.
WARNING Parts Replacement or Substitution Replacement or substitution of parts other than those recommended by Spectra® may cause a violation of the technical regulations of part 95 of the FCC Rules, or violation of Type Acceptance requirements of Part 2 of the FCC Rules. For Vehicles with an Air Bag Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air bags inflate with great force.
