Owner manual

17544 Midvale Ave. N. Shoreline, WA 98133 USA

Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com

CalMAN RGB Quick Start Guide

For Windows

1. Download CalMAN RGB from SpectraCal’s website (http:/color.spectracal.com/downloads) and run

the installer on the Windows host computer.

Note: The host computer is the one on which you run the CalMAN RGB software. CalMAN RGB can calibrate

monitors connected to the host computer, or can calibrate monitors connected to another (remote) computer on

a shared local network (see the Remote Calibration Quick Start Guide.)

2. Download and install Microsoft .NET Framework 4.5 from SpectraCal’s website on your host computer.

3. Connect the SpectraCal C3 Colorimeter to the USB port on the host computer.*

4. Click the new CalMAN RGB shortcut on your desktop to open CalMAN RGB.

For Mac

These instructions are for running CalMAN RGB within a VMware Fusion virtual Windows machine on the Mac

you wish to calibrate. To calibrate a Mac from a remote Windows computer on a shared local network without

using VMware Fusion, see the Remote Calibration Quick Start Guide.

1. Set up a VMware Fusion virtual Windows machine on your Mac. CalMAN RGB requires Windows Vista

or higher (Windows 7® SP1 or higher recommended). Set VMware Fusion to a bridged networking

mode.

2. Download the CalMAN RGB installer from SpectraCal’s website

(http://color.spectracal.com/downloads) and install on the virtual Windows machine.

3. Download Microsoft .NET Framework 4.5 from SpectraCal’s website and install on the virtual Windows

machine.

4. Download CalMAN Client 3 for Mac from SpectraCal’s website and install on the Mac OS.

5. Connect the SpectraCal C3 Colorimeter to a USB port on your Mac.*

6. Open CalMAN RGB on the virtual Windows machine using the new shortcut on your desktop.

* If you open CalMAN RGB without first connecting your colorimeter, a licensing window will appear and you will have to

restart the application once the colorimeter has been plugged-in.

See the CalMAN RGB User Guide, http://color.spectracal.com/support, for additional setup instructions,

including diagrams of the advanced configurations supported by CalMAN RGB, as well as instructions for using

CalMAN RGB software.

PAGE 1
CalMAN RGB Quick Start Guide For Windows 1. Download CalMAN RGB from SpectraCal’s website (http:/color.spectracal.com/downloads) and run the installer on the Windows host computer. Note: The host computer is the one on which you run the CalMAN RGB software. CalMAN RGB can calibrate monitors connected to the host computer, or can calibrate monitors connected to another (remote) computer on a shared local network (see the Remote Calibration Quick Start Guide.) 2. Download and install Microsoft .