NetLink Components NetLink Telephony Gateway NetLink SVP Server NetLink Wireless Telephones Quick Start Guide NetLink Telephony Gateway environments Vendor IP environments 72-1065-01 Issue B
SpectraLink Corporation Trademark Information Polycom® and the logo designs SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property of their respective owners. Patent Information The accompanying product is protected by one or more US and foreign patents and/or pending patent applications held by Polycom, Inc.
SpectraLink Corporation Quick Start Guide NetLink Components Note concerning the NetLink Telephony Gateway and the NetLink SVP Server: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
SpectraLink Corporation Quick Start Guide NetLink Components Table of Contents 1. About This Document 1.1 1.2 1.3 SpectraLink Corporation Model Numbers Referenced Documents Customer Support Hotline 2. NetLink Overview 2.1 2.2 NetLink Telephony Gateway (SRP) environments Other IP Protocol environments 5 5 5 6 7 7 7 3. NetLink Component Setup Sequence 8 4. System Diagrams 9 4.1 4.
SpectraLink Corporation 1. Quick Start Guide NetLink Components About This Document This document is a short guide to the installation, setup, and maintenance of the SpectraLink NetLink Wireless Telephone System when utilized with a traditional PBX or IP Telephony Server. It outlines the steps to install and configure the NetLink Telephony Gateway, the NetLink SVP Server, and the NetLink Wireless Telephones. 1.
SpectraLink Corporation 1.3 Quick Start Guide NetLink Components Customer Support Hotline SpectraLink wants you to have a successful installation. If you have questions please contact our Customer Support Hotline at (800) 775-5330. The hotline is open Monday through Friday, 6 a.m. to 6 p.m. Mountain time. For Technical Support: technicalsupport@polycom.com For Knowledge Base: http://www.polycom.com/usa/en/support/voice/voice.html For Return Material Authorization: rmacoordinator@polycom.
SpectraLink Corporation 2. Quick Start Guide NetLink Components NetLink Overview There are two basic types of NetLink environments – those that utilize SpectraLink Radio Protocol (SRP) with the NetLink Telephony Gateway and those that use IP protocols from third-party vendors. This document will outline the setup of both types of systems. 2.
SpectraLink Corporation 3. Quick Start Guide NetLink Components NetLink Component Setup Sequence Generally, the installation and configuration process follows these steps. 1. WLAN Set up the LAN: A wireless LAN must be properly configured and operational through the use of 802.11b wireless access points (APs). All NetLink components must be on the same subnet. See the Polycom WLAN Compatibility Table for APs that have been tested with NetLink Wireless Telephones.
SpectraLink Corporation 4. Quick Start Guide NetLink Components System Diagrams The following diagrams show two examples of WLAN systems that utilize NetLink components. The first diagram shows a system that utilizes a third-party IP protocol with NetLink components. The second diagram shows an example of a larger NetLink Telephony Gateway environment utilizing five NetLink Telephony Gateways and an SVP Server. 4.
SpectraLink Corporation 4.
