User Manual

Spectralink 87-Series Wireless Telephones User Guide
UserGuide-draft01.docx
Month 2013 43
General Operating Instructions
The barcode reader, shown next, is located at the top rear of the handset. Scanning range for
the 8450 is 4 to 12 inches. The 8452/8453 has a slightly larger reader and an operable range of
1 to 18 inches.
Scanning with the barcode reader:
71 Hold the handset so that the barcode reader is pointing to the item you want to scan. A
perpendicular angle is best but the reader can be rotated and will still work.
72 Press the scan button.
The red light comes on. Orient the red light so that it shines across the entire barcode
symbol. The red light stays on until you hear a beep that indicates the read is successful
and then the light turns off.
Note: The delay period
When the backlight is off, the scanner is in a low power state. When you press the scan
button, the backlight comes on first and about ½ second later the scan light comes on. Adjust
this delay by changing the backlight timeout settings on the Home > Settings > Basic
Settings menu.
1D Scanner 2D Scanner
73 When a beep sounds to indicate a
successful scan and the red light turns off, release the scan button. If you wish, you can
change the barcode reader sound.