User's Guide

ManualsBrandsSpectralink ManualsElectronics2.4GHz Communication System Base Equipment

Technical Guide – KIRK System 500 2G4

How to Register a MASTER Handset:

When turning on the KIRK System 500 2G4, it will automatically go into registration

mode for a period of 15 min. In this period you can register the MASTER handset

(it’s only possible to login 1 MASTER on each system. The first handset is automati-

cally the MASTER handset).

It is now possible to register the first handset (it will automatically be configured to

channel 00).

1. Press the menu key.

2. Press the < key twice

3. The menu will now show ”LOGIN ”

4. Press the



key – the menu will show”Select login ”

5. Press the > key once – then press



- the menu will now

show: Subscription search ID:

The handset will start searching for ”your” System 500. When the handset finds a

system, a number will appear in the display.

The handset might detect more than one number (This only happens if the handset

detects another system nearby. It does not mean that your- or the other system

communicates! There are no safety problems attached to this indication)

If the handset detects more than one system, a black triangle will appear in the bott-

om of the display, indicating that you can press the < key or the > key.

It is now possible to scroll between the numbers in the display by pressing the < or

the > key.

It is important that the number shown in the display is identical to the number which

you find on your System 500. The number is indicated as an ARI (indicated on the

label on the back of the base station).

When you are certain to have indicated the correct number, press the



key and the

handset will be configured as the MASTER handset of the system.

Now you have to allocate an extension number to the handset:

Summary of content (8 pages)

PAGE 1
Technical Guide – KIRK System 500 2G4 How to Register a MASTER Handset: When turning on the KIRK System 500 2G4, it will automatically go into registration mode for a period of 15 min. In this period you can register the MASTER handset (it’s only possible to login 1 MASTER on each system. The first handset is automatically the MASTER handset). It is now possible to register the first handset (it will automatically be configured to channel 00). 1. Press the menu key. 2. Press the < key twice 3.
PAGE 2
You can now enter the Serial Number of the new handset (found inside the handset ) 1. Press the”menu” key. 2. Press the > key once. 3. The menu must now show”EXT. Service” 4. Press the key. The menu will now show ” Clip Stack ” 5. Press the < key twice ”Read/Write userdata” appears in the display. 6. Then press the key. The Serial Number of the MASTER handset will now show in the display. Press the key. Right after this has been done, the handset will ask for an extension number.
PAGE 3
If the position is empty, the display will show the following ” _________________” You can now enter the Serial Number of the new handset (found inside the handset on the label under the battery). Key in the number in the line ”_______________” shown in the display followed by pressing the key. Right after this has been done, the handset will ask for an extension number. Simply enter the extension number. Then press the key (can be the ”old” extension number used on the corded phone.
PAGE 4
When 6 handsets are ” in the air ” the system sends out a busy signal. On KIRK handsets this is indicated by a flashing antenna icon in the lower left corner of the display. How to Register a Repeater to the System: Using the Repeater Programming Tool, the following must be registered: The system ARI code (Indicated on the label on the back of the base station) Number of the base station (Always 01when not dealing with Repeater Jumps) Number of the repeater.
PAGE 5
Safety Instructions Important Safety Instructions and Product Information Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property. 1 Read and understand all instructions 2 Follow all warnings and instructions including those marked on the product 3 Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners.
PAGE 6
15 This telephone will not operate in the event of a blackout. Please keep a backup phone for emergencies Intrinsic safety Do not use the handset in conditions where there is a danger of electrically ignited explosions. Exposure to sunlight, heat and moisture Do not expose the cordless phone to direct sunlight for long periods. Keep the cordless phone away from excessive heat and moisture. Battery disposal Defective batteries must be returned to a collection point for chemical waste disposal.
PAGE 7
Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the proper functioning of your telephone system, If they do and it is possible, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service. If you experience trouble with this telephone system, disconnect it from the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.
PAGE 8
same or similar design. The repaired product will be warranted for either (a) 90 days or (b) the remainder of the original one (1) year warranty period, whichever is longer. This warranty does not apply to the defects outside of our control, including but not limited to acts of God, fire, flood and damage while in transit to service facility. We do not warranty that the product will be compatible with any telephone equipment, systems or party lines.