User Manual

KIRK 4080_1G9 1417 1200 2007-06-12 10:52 Side 3 (Sort/Process Black plade)
4
1. Warnings
The KIRK 4080 is developed for use in the following potentially explosive working environments, as defined
by local fire protection authorities.
Class I, Zone 1
AEx ib IIC T3
The handset complies with the Standard UL 60079-0 and UL 60079-11
as well as CAN/CSA-E60079-0:02 Mars 2002 and CAN/CSA-E60079-11-02 Mars 2002
Class I, Division 2, Group A, B, C & D
Class II, Division 2, Group E, T3
The handset complies with the CSA Standard C22.2 No. 213-M1987
and ANSI/ISA-12.12.01-2000 Standard
For safe use of KIRK 4080, please remind the following:
• Please consult your system manager for instruction before using KIRK 4080
• Do not charge KIRK 4080 in a potentially explosive atmosphere
•
Use only the dedicated charger 8464 2458 (orange) for charging KIRK 4080
• Do not change the battery in a potentially explosive atmosphere
•
Use only the dedicated battery pack 8474 3416 (orange) for battery replacement
• The AC power adaptor used in connection with the charger must not be connected to a higher voltage than 120 Volt AC.
•
Do not open KIRK 4080 in a potentially explosive atmosphere
•
Use only headset part no. 0231 9517 in connection with KIRK 4080
•
The leather pouch 0231 9543 must be used with KIRK 4080:
1. In dry areas with humidity conditions of less than 60%
2.
When the user is wearing clothes that could cause electrostatic charging of the handset
•
If defects occur, remove KIRK 4080 immediately from the potentially explosive atmosphere
•
Only KIRK telecom A/S may repair and service KIRK 4080
• Relevant data concerning repairs must be logged
• For traceability it is advisable to keep a record of type- and serial numbers of the handsets, as well as the name
of users of the handset