User Manual

If a handset is subscribed to two systems only, you can use Auto Login B to change between the two systems

automatically. The selected system is marked with a B.

Please note: Auto login B can be used in sep arate systems which are overlapping each other. As soon as the

handset has measured a low radio signal 5 times in succession, it will st art up the Auto login B procedure and

change to an alternative system if available. Changing between two systems can only t ake place while on hook.

Any call will be dropped when changing to an alternative system.

7.5.3 Auto login

The handset can be subscribed to 10 dif ferent systems.

If a handset is subscribed to two or more systems, you can use Auto Login A to change between the systems auto -

matically . The selected system is marked with an A.

Please note: Auto login A should only be used in sep arate systems without overlap s. If a handset looses signal

from the system (the display showing OUT OF RANGE), then after 20 seconds the handset will st art searching

for an alternative system available from the Login list and automatically change to this system. Changing between

systems can only t ake place while on hook. Any call will be dropped when changing to an alternative system.