User Manual

Please note: If the Date and T ime function is supported, then date and time of the incoming or outgoing call is

shown in the CLIP/Redial st ack on the 4th line of the display . See Chap. 8 for more information.

S peed dial:

See Chap. 7.12 and Chap. 10 for more information about speed dialing.

6.1. Receiving calls

If the phone rings, the call can be answered by pressing the -key.

When ringing the LED flashes fast, and the display shows the CLIP (if presented). If it is an external call (or if no

CLIP) the display shows INCOMING CALL.

It is possible to stop the ring signal without answering the call. Press MUTE ( 3 ) and the ring signal is muted.

Display shows: RINGER MUTED.

6.2 During conversation

6.2.1 Volume regulation:

Use the two keys placed at the right side of the handset for volume control.

6.2.2 Microphone mute:

Press the 3 -key (MUTE),  MIC. MUTED is showed in the display.

Press the 3 -key (MUTE) to enable the microphone again.

6.2.3 T ransferring the call to another handset:

Press the R-key, and dial new number.

Press the -key and the call is transferred to the other handset.