KIRK 5020 1.
Contents Construction Battery information Symbol overview Menu structure Safety instructions Technical Information Battery information Product Information 3 4 5 6 12 23 24 25 2
Headset connector Volume up/down Turn On/Off and Soft key Soft key On/Off Hook Redial Keyboard lock (Menu + *) Navigation key 3
Battery information To remove the battery cover slide the back cover towards the bottom of the phone. When the back cover is released, take it off the phone. Please note: The product label, including the CE logo, can be found in the battery compartment.
Symbol overview 5
Menu structure Turning handset On and Off 6
Menu structure Lock and unlock handset 7
Menu structure 8
Menu structure 9
Menu structure 10
Menu structure 11
Safety instructions Before using your telephone equipment, you should always follow basic safety instruction to reduce the risk of fire, electrical shock and injury to persons, and damage to property. 1 2 3 4 5 6 7 8 Read and understand all instructions Follow all warnings and instructions including those marked on the product Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners.
9 To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or removing covers may expose you to dangerous voltages, dangerous electrical current, or other risks. Incorrect reassemble can cause electrical shock when the appliance is subsequently used. If the product need repair, consult your dealer.
13 Do not place the unit near microwave ovens, radio equipment, or non-ground connected televisions. These appliances may cause electrical interference to the base or handset 14 The unit must be installed on a hard, plane surface and connected to a functional 120 volt AC power net adapter and plug the adapter into the power outlet 15 The system will not operate in the event of a blackout.
Spare parts and accessories • Use only approved spare parts and accessories. The operation of non-approved parts cannot be guaranteed and may even cause damage. Power failure In the event of a power failure, you cannot use the wireless solution to make or receive calls NOTICES NOTICE: • Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
• Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas. • CAUTIONS: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
Note: • This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC Note: • This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: • (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: • Privacy of communication may not be ensured when using this phone. • Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires electricity for operation. You should have a telephone which does not require electricity available for use during power outages.
LIMITED WARRANTY • This limited, non-transferable warranty is provided to the original purchaser. The product is warranted to be free from defects in materials and workmanship under normal installation, use and service for a period of one (1) year from the date of purchase as shown on the purchaser’s receipt.
• Repair or replacement of the product is your sole and exclusive remedy. • If the product is repaired, reconditioned component parts or materials may be used. If the product is replaced, we may replace it with a new or reconditioned product of the same or similar design. The repaired product will be warranted for either (a) 90 days or (b) the remainder of the original one (1) year warranty period, whichever is longer.
• We assume no responsibilities for damages or penalties incurred resulting from the use of this product in a manner or location other than that for which it was intended. • THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED. ANY IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN LIMITED WARRANTY.
Technical Information Approvals • Acoustics: • Electrical/DECT RF: • Access profile: • EMC: • Safety: • TBR 10 EN 301 406 TBR 22 (GAP) EN 301 489 -1/-6 EN 60950-1:2001 + A11:2004 + Corrigendum:2004 EN 50360:2001 Size and weight • Size: 145 x 48 x 19 mm • Weight: 110 g including battery ± 10 g Capacity • Active talking time 12 hours • Stand-by time 150 hours 23
Battery pack information 87743418 Lithium-ion battery ICP73048 Nominal voltage: 3.7V Rated capacity: 1.0Ah Max charge voltage 4.2V Max discharge current 2.0A Max charge current: 1.0A Safety advises for Lithium-ion batteries: • Don’t crush. • Don’t heat or incinerate • Don’t short-circuit • Don’t dismantle • Don’t immerse in any liquid • It may vent or rupture • Respect charging instructions • Don’t charge below 0 c • Discharge: -20 c to + 60 c Date code U3 Made for KIRK telecom A/s By YL Energy Ltd.
Product Information • The product must not be disposed of with unsorted waste, but must be collected separately. • Please find the EC Declaration of Conformity at http://www.kirktelecom.com/company/suk242.
