Installation Instructions

SpectraLink Corporation Installing the Outdoor Base Station
2. Installing Flush Against a Wall or Hard Ceiling
Items provided: Outdoor enclosure, Base Station
Items needed: 4 anchor bolts (length and type depends on wall or ceiling
material Base Station is being mounted to)
1. Mark and drill 4 holes into the wall or ceiling, using the mounting flanges of the
outdoor enclosure as a guide.
2. Mount outdoor enclosure to wall or ceiling using anchor bolts. The outdoor
enclosure can be mounted with the compression fitting in any direction.
3. Slide the Base Station cable through the compression fitting and tighten fitting.
Compression
fitting
4. Crimp an RJ45 onto the Base Station cable using the same wiring guide as the
indoor Base Station.
PN: 72-0050-00-D.doc Page 6