Owners manual

176318

5/2/17

Installation Instructions

If you need any assistance please call 1-800-858-3333 to speak with a representative in our

Customer Service Center before returning the product.

P/N 42881 (chrome) - P/N 42881G (bronze)

P/N 42881K (black) - P/N 42881S (silver)

42837

Step 1

Before you permanently install the fuse box cover, place it onto the factory fuse box lid to ensure

proper t and alignment.

Step 2

Then clean the top of the factory fuse box lid with rubbing alcohol to remove any dirt, oil or con-

taminants.

Step 3

Peel the backing lm o the double sided tape. Place the lid onto the fuse box lid making sure it

aligns properly and press rmly to set.

42829

Step 1

Clean the top of the factory coolant reservoir cap with rubbing alcohol to remove any dirt,

oil or contaminants.

Step 2

Peel the backing lm o the double sided tape, then place the cap cover onto the factory

cap and press rmly to set.

Step 3

For all other Cap Covers, place the cap cover onto the factory cap and press rmly to

install until the tabs engage fully around the stock cap.

42831

Step 1

Place one half of the handle cover on each side of the factory dipstick handle, then press rmly

together until the cover clamps into place.

ATTENTION: Do not use harsh chemicals to clean covers.