Owners manual

176320

5/2/17

Installation Instructions

If you need any assistance please call 1-800-858-3333 to speak

with a representative in our Customer Service Center before

returning the product.

P/N 42981 (chrome) - P/N 42981G (bronze)

P/N 42981K (black) - P/N 42981S (silver)

42927

Step 1

Before you permanently install the fuse box cover, place it onto the factory fuse box lid to ensure

proper t and alignment.

Step 2

Then clean the top of the factory fuse box lid with rubbing alcohol to remove any dirt, oil or

contaminants.

Step 3

Peel the backing lm o the double sided tape. Place the cover onto the fuse box lid making sure it

aligns properly and press rmly to set.

42929

Step 1

Place the cap cover onto the factory cap and press rmly to install until the tabs engage fully around

the stock cap.

42951

Step 1

Place one half of the handle cover on each side of the factory dipstick handle, then press rmly

together until the cover clamps into place.

42953

Step 1

Remove the factory brake uid reservoir cap.

Step 2

Before you permanently install the brake reservoir cover, place it onto the factory brake reservoir to

ensure proper t and alignment.

Step 3

Then clean the top of the factory brake reservoir with rubbing alcohol to remove any dirt, oil or

contaminants.

Step 4

Peel the backing lm o the double sided tape. Place the lid onto the brake reservoir making sure it

aligns properly and press rmly to set.

ATTENTION: Do not use harsh chemicals to clean covers.