Owner manual

SharpEye

UV Flame Detector User Guide

2 Model and Types

The SharpEye 40/40 detectors are designed to operate as a stand-alone unit

directly connected to an alarm system or an automatic fire extinguishing

system. The detector can also be a part of a more complex system, where

many detectors and other devices are integrated through a common control

unit.

1.2 Model and Types

The 40/40U and UB flame detectors are provided in various configurations

depending on:

 UV Models

 Wiring options

 Temperature ranges

 Type of cable entries

 Housing type

 Required approval

The configuration detail is included in the product part number on the

product label and takes the form: 40/40U and UB XXXXX, where XXXXX

defines the model according to the above requirements.

To modify the default or pre-ordered configuration and perform

maintenance tasks, please refer to the HART Protocol TM777030, the

RS-485 Manual TM 777050 or TM777070.

The Part Numbers are defined as:

Note: *Aluminum housing is available in ATEX/IECEx version only.

Table 1 describes the wiring options in detail.