User's Manual

Perform the door handing process.

A B

C D !

status

LED

Install 4 AA batteries in the battery pack.

IMPORTANT: Make sure the door is open. Insert the battery pack

while PRESSING AND HOLDING the Program button. Release the

button when the battery pack is all the way inside the lock interior.

IMPORTANT: The Status LED will lash red

and green, and the lock will beep. Press and

release the Program button again.

The latch bolt will retract and extend on its own to learn

the orientation of the door.

OTHER DEADBOLTS:

If the latch bolt does not move on its

own, or if the Status LED indicates

a door handing failure, make sure

the batteries are installed correctly,

and perform steps BD again.

The Status LED will

indicate success

or failure.

Success: LED

lashes green

Failure: LED

remains solid red.

Right

This step will teach the lock the orientation of your door and is crucial for lock operation.

Ensure correct polarity. For best

results, use new, non-rechargeable

Alkaline batteries only.

BALDWIN ESTATE DEADBOLTS ONLY:

If your latch bolt is to the RIGHT of your

interior assembly, and the Status LED

indicates a failure, press and release the

Program button again. The door handing

process will restart.