User Manual

Chapter 3: Configuring the 1734sc-IF4U for RSLogix 5000 3-11
User’s Manual Pub. 0300266-01 Rev. A
Generic Module Profile:
[Name of remote communication module]:e:x.Data[0 to 198]
e = IF4U slot number
x = Image Type (i.e. C, I, or O)
AOP (Add-On-Profile):
[Name of remote communication module]:e:x
e = IF4U slot number
x = Image Type (i.e. C, I, or O)
Note: The AOP will provide a predefined tag structure for the
configuration. See example below.
Figure 6 (AOP Config. Tags)
Table 3-1 (IF4U Configuration Assembly)
Instance:
225 (0xE1)
Size:
12 bytes RSL5K (Dnet 8 bytes)
OFFSET FIELD TYPE BYTES
0x00
Channel 0 Configuration
(See section “Channel Configuration Details”
below)
INT 2
0x02 Channel 1 Configuration (Same as above) INT 2
0x04 Channel 2 Configuration (Same as above) INT 2
0x06 Channel 3 Configuration (Same as above) INT 2