User Guide

Important: This cover is designed for a
Spectrum Remote (provided separately)
and won’t t on other remotes.
A Refer to the diagram to make
sure you have the correct remote.
B If you haven’t already
programmed your remote, visit
spectrum.net/spectrumremote
for instructions.
STEP 1
Check
Your Remote
A
Line up the cover above
the remote.
B Press down rmly until the
cover snaps into place.
C Your cover is now attached, and
you’re all set to use the remote.
A Firmly hold the remote.
B Pull up on the side of the
cover until it unsnaps from
the remote.
STEP 2
Attach
the Cover
Removing
the Cover