User's Manual

Switch between button modes on the
remote control (PSM6500, PSM6800)
To switch between the button modes:
1. Press the End-of-letter/priority (•EoL/••Prio) button and the Insert/overwrite (INS/OVR) button simultaneously for
three seconds.
X All button LEDs on the remote control ash simultaneously.
2. Press the corresponding button for the desired mode. The buttons are assigned to the button modes as follows:
Mode Button Function of Record button
Event mode F1 Start/end recording
Keyboard mode F2 Turn on/o SpeechOne microphone when using Dragon
speech recognition software
Browser mode F3 Start/end recording
Windows speech recognition
mode
F4 Turn on/o Windows microphone
Dragon for Mac mode •EoL/••Prio Turn on/ o Dragon microphone
Dragon for Windows mode INS/OVR Turn on/ o Dragon microphone
X The SpeechOne exits the mode selection and switches to the selected mode.
NOTE
You have 10 seconds to select a mode. After 10 seconds, you will automatically exit mode selection and
need to restart the mode selection steps.
TIP
You can always check your current button mode by briey pressing the End-of-letter/priority (•EoL/••Prio)
button and the Insert/overwrite (INS/OVR) button simultaneously. The LED ogf the button assigned to the
current mode (see previous table) shortly lights up orange. E.g. if the currently activated mode is the Event
mode, the LED of the F1 button lights up orange.
24