User's Manual

Configure Tools

Click on the SAVE button to backup your NUS1000 settings. You can use this saved

file to restore your configuration at a later time. The configuration can also be reset

to the factory default setting by clicking the Reset button.

Firmware

This tool allows you to upgrade the firmware of the NUS1000. Click on Browse to

select the firmware file to upload, and then click on Upgrade. The system will

prompt you to confirm the upgrade. Please note that the system will reset to factory

default settings after the upgrade, so it is advisable to backup your configuration

and restore it after any firmware upgrades. However if there are new features in the

new firmware, you can modify them and then re-save your configuration.

4.8. Shutdown

You can either shutdown or reboot the NUS1000 from this menu.

a. Shutdown: Select the Shutdown button to turn off the NUS1000.

b. Reboot: Select the Reboot button to restart the NUS1000.