User Manual

ManualsBrandsSpeed Queen ManualsDryers9kg LP Gas Dryer

WARNING

To reduce the risk of fire, electric shock or personal

injury, all wiring and earthing to the dryer MUST con-

form with the latest edition of the Australian Electri-

cal Standards, AS3000, SAA wiring rules, and such

local regulations that might apply.

W478

This dryer is designed to be operated on a two-wire, plus earth/

ground, 240 Volt, 50 Hertz, single-phase circuit, fused at 20 Am-

peres.

Insert the dryer’s lead-in cord plug into an earthing three-slot-

plus earth/ground, wall receptacle on a separate circuit. Do not

operate other appliances on the same circuit.

CAUTION

If this appliance is supplied from a cord extension

set or an electrical portable outlet device, the cord

extension set or electrical portable outlet device

must be positioned so that it is not subject to

splashing or ingress of moisture.

W563

If the supply cord is damaged, it must be replaced by the manu-

facturer, its special agent or similarly qualified persons in order to

avoid a hazard.

DRY2587N_SVG

250 V

1. Lead-In Cord

2. Earth/Ground Screw

3. Lead-In Cord Plug

4. Earth/Ground

Figure 16

Gas Dryer

NOTE: The wiring diagram is located in the control

hood.