Instruction Manual

To Wash Clothes

IMPORTANT: Before using your new washer, make sure

the washer cord is connected to an appropriate electrical

outlet that is properly installed and connected to a pro-

tective earth/ground. Make sure the washer hoses are

connected to the hot and cold water faucets, and that the

faucets are turned on. Be sure the drain hose is not

kinked and is inserted into a drain. Refer to the INSTAL-

LATION INSTRUCTIONS for details of proper washer in-

stallation.

IMPORTANT: Prior to first wash, use an all purpose

cleaner, or a detergent and water solution, and a damp

cloth to remove shipping dust from inside of wash drum.

1. Get the clothes ready for washing. Empty pockets and cuffs.

Sort items into separate loads. Pretreat stains and heavily

soiled areas.

TLW1991N_SVG

IMPORTANT: Remove all sharp objects from laundry

to avoid tears and rips to items during normal ma-

chine operation.

2. Measure and add low sudsing, high efficiency (HE) detergent,

fabric softener and bleach to the dispenser drawer. Refer to

section on Using Your Dispenser Drawer. Follow instructions on

detergent package for amount to use.

FLW2308N_svg

NOTE: High efficiency (HE) detergents are designed

especially for frontload washers to reduce oversuds-

ing and maximize cleaning results. Look for the HE

logo or “high efficiency” on the detergent’s label.

IMPORTANT: If using non-HE detergent, avoid over-

sudsing by using only 1/2 of the detergent manufac-

turer's recommended amount.

3. Load clothes into wash drum (21 pounds [9.5 kg] maximum dry

clothes load). Refer to section on Load Sizes.

NOTE: Small items such as baby socks may get

caught around the door. Place these articles inside a

mesh garment bag.

FLW2309N_SVG

4. Close the loading door tightly. The washer will not operate with

the loading door open.

FLW2310N_SVG

Control Panel

Part No. 804648R3