User's Guide for Topload Washers TLW22C_SVG Original Instructions Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) www.alliancelaundry.com Part No.
Front Matter Front Matter WARNING Failure to install, maintain, and/or operate this machine according to the manufacturer's instructions may result in conditions which can produce bodily injury and/or property damage. W030 WARNING For your safety and to reduce the risk of fire or an explosion, do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Table of Contents Safety Information............................................................................. 5 Explanation of Safety Messages................................................................. 5 Important Safety Instructions....................................................................5 Operation......................................................................................... 7 Before Washing...................................................................................
Safety Information Safety Information Explanation of Safety Messages WARNING Precautionary statements (“DANGER,” “WARNING,” and “CAUTION”), followed by specific instructions, are found in this manual and on machine decals. These precautions are intended for the personal safety of the operator, user, servicer, and those maintaining the machine.
Safety Information • Never operate the washer with any guards, panels and/or parts removed or broken. DO NOT tamper with the controls or bypass any safety devices. Use your washer only for its intended purpose, washing clothes. Always follow the fabric care instructions supplied by the garment manufacturer. Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids.
Operation Operation Before Washing Prepare Wash Load Empty Pockets and Cuffs Make sure all pockets are empty and turn them inside out. One bobby pin, metal or plastic toy, nail or sharp object in a load can catch laundry, cause tears and plug the pump. Facial tissue left in a pocket will produce extreme “lint”. A crayon or lipstick in a wash load may cause stains that cannot be removed. Roll down cuffs and shake out grass, sand and gravel.
Operation • Drop items loosely into the washtub. The bulk of the clothes rather than the weight will determine load size. Do not pack items in or wrap them around the agitator. Overloading can cause poor cleaning, excessive wrinkling and tears.
Operation Wash Temperature Guide Water Temperature HOT Use • • • • WARM • • • • COOL • • COLD • • Comments Sturdy whites and colorfast items Work clothes Soiled items Nappies • • Best cleaning for soiled items Good for sanitizing Light and mod- • erately soiled items Non-colorfast or dark colors • Permanent • press Silks, woolens, nylon, acrylic Reduces wrinkling in permanent press fabrics Less fading Reduces shrinking in knits Permanent press Silks, woolens, nylon, acrylic • • Less fading
Control Panel Control Panel Preset Cycles Power Cancel Heavy Duty Whites Normal Eco Perm Press Delicate Favorite Bulky Quick Wash Rinse & Spin Spin Temp Cold Load Size Small Cool Medium Warm Soak Soil Level Light Medium Heavy Max Pause Soak PreWash Second Rinse Third Rinse Delay Start Signal Hot Large Extra Large Start Control Lock Wash Rinse Spin TLW2225N_SVG items, use a higher soil level selection. Lightly soiled items require less wash time.
Control Panel and the cycle time for the selected cycle. Pressing the Favorite keypad again will save the current settings and display the next Favorite cycle, F2. Pressing Start/Pause or Delay Start keypads will also save the current settings. Pressing Power/Cancel keypad will discard the currently selected Favorite cycle setting changes. Nine favorite cycles can be saved. The Soak option adds a 27 minute soak to the beginning of the cycle. Use for heavily soiled or stained clothing.
Control Panel Rinse The Rinse status light is lit during the rinse portions of the cycle including Second Rinse and Third Rinse, if selected. Spin The Spin status light is lit during the final spin portion of the cycle. NOTE: High efficiency (HE) detergent is recommended for use in this machine. Look for the HE logo or “high efficiency” on the detergent’s label. 3. Add clothes loosely into the washtub. Safety: Maximum mass 7.5 kg (dry cloth). Energy Efficiency: 8.5 kg capacity.
Control Panel The washer will stop (pause) shortly before the wash and rinse spins. They are a normal part of the cycle. Manual Soaking Do not fill the washer and open the lid or press the Start/Pause button to perform a soak cycle. Use the Soak option on the control panel to perform this operation. Part No.
Cycle Operation Cycle Operation The cycles of your washer include several different stages. Refer to the tables below for what can be expected during the cycles that you select. The cycle stages are dependent on the cycle, selections and options chosen. Cycle stages that are Options must be selected on the keypad to be included in the cycle. NOTE: The rinse water temperature will be cold, including when optional rinses are selected.
Cycle Operation All Other Cycles Cycle Stage Activity Pre-Wash Fill/Agitate/Drain/Spin Wash Fill/Agitate/Drain/Spin-Spray Time (minutes) 15:10 Comments Option Heavy Duty = 17:45 Whites = 19:45 Perm Press = 15:45 Quick Wash = 14:45 Bulky = 19:45 Rinse Fill/Agitate/Drain/Spin 12:10 Second Rinse Fill/Agitate/Drain/Spin 12:10 Option Third Rinse Fill/Agitate/Drain/Spin 24:20 Option Final Spin Spin 5:00 ing stains on clothes if the softener comes into contact with detergent suds.
Cycle Operation 1 2 3 TLW2001N_SVG 1. Dispenser Housing 2. Dispenser Cup 3. Agitator Use Tips • • • • Fabric softener spilled onto garments may cause staining. To remove, dampen stain and rub with bar soap. Wash as usual. Liquid fabric softeners will be dispensed during the first rinse and should not be combined with bleach, bluing, starch, detergents, soaps or packaged water conditioners. Fabric softener is not to be used in dispenser when using Prewash cycle, if available.
Clothing Care Clothing Care Clothing Concerns To keep clothes looking white or bright, use good washing practices at all times to prevent a gradual build-up of soil or water hardness Problem Gray or Dingy Clothes minerals on them. If you notice that your clothes are not as bright as they should be, take corrective measures immediately. Cause Insufficient Detergent Solution Add more detergent to washtub before loading clothes. Mild detergents are not suitable for average soil.
Clothing Care Problem Excessive Lint Cause Solution Improper Sorting Fabrics that shed lint cannot be washed with fabrics that receive lint. Insufficient Detergent/Non-phosphate Detergent Use enough detergent so lint remains suspended in water and flushed out. Do not oversuds the water. Mixing Fabric Types Knits and permanent press attract lint. Wash these only with similar items. Use fabric softener in rinse water.
Maintenance Maintenance Cold Weather Care Vacations and Extended Non-Use If the unit is delivered on a cold day (below freezing), or is stored in an unheated room or area during the cold months, do not attempt to operate the washer until it has had a chance to warm up. Water from the previous cycle may remain. IMPORTANT: To avoid possible property damage due to flooding, turn off the water supply to the washer whenever there will be an extended period of non-use.
Maintenance Refer to illustration below. 1 2 3 4 1. 2. 3. 4. TLW2044N_SVG Shipping Brace Shipping Plug Opening Base Opening Shipping Plug After the shipping brace has been installed in the lid opening, tilt washer back enough to access base opening. Insert shipping plug into base opening and, using the palm of your hand, push shipping plug into washer until it snaps into shipping plug opening.
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Washer Symptom Won't Fill Possible Cause/Solution • • • • • • • • • • Won't Start • • • • • • Won't Agitate • • • • • • Part No. 203061R2 Make sure power cord is plugged all the way into the electrical outlet. Make sure hot and cold water taps are turned on. Make sure that the fill hoses are not kinked or twisted. Press Start/Pause button to start washer.
Troubleshooting Washer Symptom Won't Spin Possible Cause/Solution • • • • • • Stops/Pauses During Cycle • • • Make sure lid is closed. Press Start/Pause button to start washer. Make sure power cord is plugged all the way into the electrical outlet. Check the laundry room fuse or circuit breaker. The motor overload protector may have stopped the cycle. It will reset itself and the display will show tp, St. Press the Start/Pause button to resume cycle. Broken drive belt. Call the service person.
Troubleshooting Washer Symptom Wrong Water Temperature Possible Cause/Solution • • • tP on digital display • • Er, FL on digital display • • • • • OF, St on digital display • • • Er, dr on digital display • Other Er Codes Contact Information If service is required, contact the nearest Factory Authorized Service Center. If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact: Alliance Laundry Systems Shepard Street P.O.
Troubleshooting 1 TLW2003N_SVG 1. Serial Plate When contacting us about your washer, PLEASE GIVE THE MODEL AND SERIAL NUMBERS. The model and serial numbers are located on the serial plate. The serial plate will be in the location shown. Please include a copy of your bill of sale and any service receipts you have.