USER'S GUIDE

ManualsBrandsSpeed Queen ManualsDryers27 Inch Gas Dryer with 7 Cu. Ft. Capacity, Sanitize, Reversible Door, Interior Light, Up-Front Lint Filter, Galvanized Cylinder, 220-CFM Exhaust, 3 Preset Cycles, 2 Auto Dry Cycles, 3 Temperature Selections, and ADA Compliant

To Dry Clothes

This appliance shall not be used to dry off solvents or dry

cleaning fluids. Fabric softeners, or similar products, should

be used as specified by the fabric softener instructions.

IMPORTANT: Refer to the INSTALLATION INSTRUC-

TIONS before using dryer.

IMPORTANT: Before using dryer for the first time, use

an all-purpose cleaner or a detergent and water solu-

tion and a damp cloth to remove shipping dust from in-

side of dryer drum.

NOTE: This appliance is designed for repeated normal

operation according to operating instructions.

1. Sort items into separate loads.

NOTE: Remove all objects from pockets such as

lighters and matches.

IMPORTANT: Oil affected items can ignite spontane-

ously, especially when exposed to heat sources

such as in a tumble dryer. The items become warm,

causing an oxidation reaction in the oil. Oxidation

creates heat. If the heat cannot escape, the items

can become hot enough to catch fire. Piling, stack-

ing or storing oil affected items can prevent heat

from escaping and so create a fire hazard.

NOTE: Remove all sharp objects from laundry to

avoid tears and rips to items during normal machine

operation.

2. Clean lint filter (if using lint filter guard, remove first).

1. Lint Filter Guard (optional)

2. Lint Filter

Figure 2

WARNING

To reduce the risk of fire and risk of lint collecting

in exhaust duct, do not operate dryer without lint

filter in place.

W771

NOTE: The Lint Filter Guard is an optional accesso-

ry to help prevent items from falling in the lint filter.

3. Load dryer half full with laundry ( 18 pounds [8.2 kg] maxi-

mum dry clothes load). Add fabric softener sheet, if de-

sired.

NOTE: To avoid damage to dryer, do not use more

than one fabric softener sheet per load.

D666I_SVG

4. Close loading door. Dryer will not operate with the door

open.

D668IE0A

5. Select Fabric Selector based on load type. Follow garment

manufacturer's care labels for recommended temperature

settings.

6. Select the desired Cycle setting under Cycle Selection us-

ing the timer knob. These settings control the drying time.

The ENERGY SAVER settings, marked with an asterisk (*),

show which dryer settings will use the least energy and will

leave items damp for easier ironing.

7. Push start button.

To Dry Clothes

DO NOT COPY or TRANSMIT

12 Part No. D518540EN