User's Guide for Dryers Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) www.alliancelaundry.com Part No.
WARNING WARNING WARNING • Risk of fire. Highly flammable material. • W881 Hazardous voltage inside. Disconnect power before servicing. Read all instructions before using unit. WARNING FOR YOUR SAFETY, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or death. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
WARNING • • • Installation of unit must be performed by a qualified installer. Install clothes dryer according to manufacturer’s instructions and local codes. DO NOT install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Refer to section on connecting exhaust system.
Product Registration Product Registration New owners of Alliance Laundry Systems equipment are encouraged to register their appliance to insure proper limited warranty coverage. Register online at http://www.speedqueen.com/home/en-us/support/product-registration.aspx or contact your dealer to register your appliance. All information will be kept confidential and will not be distributed to other parties. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 5 Part No.
Table of Contents Product Registration............................................................................... 5 Safety Information...................................................................................7 Explanation of Safety Messages.....................................................................7 Important Safety Instructions......................................................................... 7 Before Drying.....................................................................
Safety Information Safety Information • Install this dryer according to the INSTALLATION INSTRUCTIONS. Refer to the EARTH/GROUND INSTRUCTIONS in the INSTALLATION manual for the proper earth/ground connection of the dryer. All connections for electrical power, earth/ ground and gas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself. • Do not install or store the dryer where it will be exposed to water and/or weather.
Safety Information • Use the dryer only for its intended purpose, drying clothes. ALWAYS follow the fabric care instructions supplied by the garment manufacturer and only use the dryer drum to dry textiles that have been washed in water. • Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).
Before Drying Before Drying 1. Sort by color. 2. Separate lint shedding fabrics and lint receiving fabrics. Towels, flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint. 3. Separate no heat, low heat and high heat items. Energy Saving Tips • • • • • • • • • • Make sure the lint filter is always clean. Do not overload the dryer. Do not overdry items. Remove items to be ironed while still damp.
Before Drying Cylinder with wet permanent press items D666I_SVG © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 10 Part No.
Operating Your Dryer Operating Your Dryer Auto-Sensing WARNING To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information section before operating the dryer. W520 The Auto-Sensing drying cycle operation is determined by the type of cycle selected as well as the moisture sensing system, which can be set by changing the Dryness setting. Auto-Sensing cycles are Energy Saver cycles that help prevent over-drying.
Operating Your Dryer Favorite The Favorite cycle keypad allows the user to save different cycles, selections and options for later use. Nine favorite cycles can be saved. 1. Press the Favorite keypad. The control will display the cycle and modifier settings for the first Favorite cycle. The 2-digit display will switch between F1 and the cycle time for the selected cycle. 2. Press the keypads for the desired cycle, selection and option settings. 3. Press the Favorite keypad to save the settings.
Operating Your Dryer Status WARNING The Status lights are lit during the cycle to show what part of the cycle is running. Door Open To reduce the risk of fire and risk of lint collecting in exhaust duct, do not operate dryer without lint filter in place. The Door Open status light is lit any time that the dryer door is open. Heating The Heating status light is lit to indicate that a heat portion of the cycle is currently operating.
Operating Your Dryer NOTE: To stop dryer at any time, open the door or press the Start/Pause button. To restart dryer, close door and press the Start/Pause button again. Optional Drying Rack A drying rack, Part No. D512082, is available at extra cost through your Factory Authorized Service Center. The drying rack can be used in manual cycles only for no-tumble drying of articles such as tennis shoes, sweaters, stuffed toys or other delicate items.
Maintenance Maintenance Lubrication WARNING All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary. Any disassembly requiring the use of tools must be performed by a suitably qualified service person. Care of Your Dryer W299 WARNING To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to the dryer before cleaning the interior.
Maintenance 1 DRY2782N_SVG 1. Lint Filter Figure 2 Cylinder Light If the dryer cylinder light needs replacment, order 10 Watt bulb, part number 60954. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 16 Part No.
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Dryer Symptom Possible Cause/Solution Dryer won’t start • Make sure the power cord is plugged all the way into the electrical outlet. • Make sure loading door is closed. • Press Start/Pause button to start dryer. • Make sure the laundry room fuse(s) isn’t blown or loose, or circuit breakers aren’t open. • The dryer itself does not have an electrical fuse.
Troubleshooting Dryer Symptom Possible Cause/Solution Dryer is noisy • Check dryer for foreign objects (nails, coins, bobby pins, metal, plastic toys, etc.). Remove items from dryer. • Make sure dryer is level. Uneven leveling can cause vibration. • Normal operating sounds include the heat source going on and off and the humming of air moving through the dryer and exhaust system. Clothes are too wrinkled • Check heat setting. Overdrying can cause wrinkling. • Check load size.
Troubleshooting Contact Information If service is required, contact the nearest Factory Authorized Service Center. To find the nearest service center, visit us online at www.speedqueen.com. If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact: Shepard Street P.O. Box 990 Ripon, Wisconsin 54971-0990 www.speedqueen.