Installation Instructions

SWD1029N_SVG

1. Level

2. Wood Block

3. Rubber Foot

4. Leveling Leg

5. Locknut

6. Unit Base

Figure 22

Wipe Out Inside of Washer and Dryer

Drums

IMPORTANT: Prior to first wash, use an all-purpose

cleaner, or a detergent and water solution, and a damp

cloth to remove shipping dust from inside the drums.

SWD1012N_SVG

Figure 23

SWD1013N_SVG

Figure 24

Plug In the Washer and Dryer

Electric Dryer

Connect the dryer to an electrical power source. Refer to Connect

Electrical Plug section for information on connecting power cord.

Connect to 30 Amp Circuit

D275I_SVG2

Figure 25

Gas Dryer

Dryer requires 120 Volt, 60 Hertz electrical supply and comes

equipped with a 3-prong earth/ground plug. Refer to serial plate

for specific electrical requirements.

NOTE: The wiring diagram is located in the control cab-

inet.

Installation

DO NOT COPY or TRANSMIT

22 Part No. 805504R1