Installation Instructions
Table Of Contents
- Table of Contents
- Dimensions
- Installation
- Before You Start
- Position Unit Near Installation Area
- Remove Shipping Materials
- Connect Fill Hoses
- Connect Drain Hose to Drain Receptacle
- Gas Dryers - Connect Gas Supply Pipe
- Electric Dryer Only - Connect Electrical Plug
- Connect Dryer Exhaust System
- Position and Level the Unit
- Wipe Out Inside of Washer and Dryer Drums
- Plug In the Washer and Dryer
- Check Installation
- Check Heat Source
- Installer Checklist
Q 27.73 in. [704 mm]
R (with door closed) 1.5 in. [38 mm]
S *13.1 in. [333 mm]
* With leveling legs turned into base.
** For ADA compliance turn legs out from base 0.5 inches.
NOTE: Exhaust openings are 4 inch [102 mm] metal
ducting.
Dimensions
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
8 Part No. 805504R1