LTS95A/N3000/LTS90A/N1127 Frontload Washers Operating Instructtion
Safety Information
801562
6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7. Before the washer is removed from service or 
discarded, remove the door to the washing 
compartment.
8. Do not reach into the washer if the wash drum is 
moving.
9. Do not install or store the washer where it will be 
exposed to water and/or weather.
10. Do not tamper with the controls.
11. Do not repair or replace any part of the washer, or 
attempt any servicing unless specifically 
recommended in the User-Maintenance 
instructions or in published User-Repair 
instructions that you understand and have the 
skills to carry out.
12. To reduce the risk of an electric shock or fire, DO 
NOT use an extension cord or an adapter to 
connect the washer to the electrical power 
source.
13. Use your washer only for its intended purpose, 
washing clothes.
14. ALWAYS disconnect the washer from electrical 
supply before attempting any service. Disconnect 
the power cord by grasping the plug, not the cord.
15. Install the washer according to the 
INSTALLATION INSTRUCTIONS. All 
connections for water, drain, electrical power and 
earthing must comply with local codes and be 
made by licensed personnel when required. Do 
not do it yourself unless you know how!
16. To reduce the risk of fire, clothes which have 
traces of any flammable substances such as 
vegetable oil, cooking oil, machine oil, 
flammable chemicals, thinner, etc. or anything 
containing wax or chemicals such as in mops and 
cleaning cloths, must not be put into the washer. 
These flammable substances may cause the 
fabric to catch on fire by itself.
17. Do not use fabric softeners or products to 
eliminate static unless recommended by the 
manufacturer of the fabric softener or product.
18. Keep your washer in good condition. Bumping or 
dropping the washer can damage safety features. 
If this occurs, have your washer checked by a 
qualified service person.
19. Replace worn power cords and/or loose plugs.
20. Be sure water connections have a shut-off valve 
and that fill hose connections are tight. CLOSE 
the shut-off valves at the end of each wash day.
21. Loading door MUST BE CLOSED any time the 
washer is to fill, tumble or spin. DO NOT bypass 
the loading door switch by permitting the washer 
to operate with the loading door open. 
22. Always read and follow manufacturer’s 
instructions on packages of laundry and cleaning 
aids. Heed all warnings or precautions. To reduce 
the risk of poisoning or chemical burns, keep 
them out of the reach of children at all times 
(preferably in a locked cabinet).
23. Always follow the fabric care instructions 
supplied by the garment manufacturer.
24. Never operate the washer with any guards and/or 
panels removed.
25. DO NOT operate the washer with missing or 
broken parts.
26. DO NOT bypass any safety devices.
27. Failure to install, maintain, and/or operate this 
washer according to the manufacturer’s 
instructions may result in conditions which can 
produce bodily injury and/or property damage.
NOTE: The WARNING and IMPORTANT 
SAFETY INSTRUCTIONS appearing in this 
manual are not meant to cover all possible 
conditions and situations that may occur. Common 
sense, caution and care must be exercised when 
installing, maintaining, or operating the washer.
Always contact your dealer, distributor, service agent 
or the manufacturer about any problems or conditions 
you do not understand.










