Owner Manual

Table Of Contents

Four-Wire Connection

D680I_SVG

1. Ground Wire

2. Ground Screw

3. “L1” Terminal

4. Neutral Terminal

5. “L2” Terminal

6. Black Wire

7. White Wire (Neutral)

8. Strain Relief (Not supplied with dryer)

9. Red Wire

Figure 12

NOTE: Dryer is shown with access cover removed for

illustration purposes only. NEVER operate the dryer

with access cover removed.

Connecting Power Cord with Three-Wire Plug

NOTE: Four-wire cord is required for new branch-cir-

cuit installations, mobile homes or where codes do not

permit grounding through neutral.

NOTE: The power cord is NOT supplied with the elec-

tric dryer. Type of power cord and gauge of wire must

conform to local codes and instructions. The method

of wiring the dryer is optional and subject to local code

requirements.

NOTE: Connect the dryer to the power supply with the

MAXIMUM RATED VOLTAGE listed on the serial plate.

NOTE: Use COPPER WIRE only.

Shorter than 15 ft. (4.5 m) – use 10 AWG

Longer than 15 ft. (4.5 m) – use 8 AWG

Installation

DO NOT COPY or TRANSMIT

23 Part No. D514691ENR8