Installation Instructions
Table Of Contents
- Table of Contents
- Dimensions
- Installation
- Before You Start
- Position Unit Near Installation Area
- Remove Shipping Materials
- Connect Fill Hoses
- Connect Drain Hose to Drain Receptacle
- Gas Dryers - Connect Gas Supply Pipe
- Electric Dryer Only - Connect Electrical Plug
- Connect Dryer Exhaust System
- Position and Level the Unit
- Reverse Door, if Desired
- Wipe Out Inside of Washer and Dryer Drum
- Plug In the Washer and Dryer
- Check Installation
- Check Heat Source
- Installer Checklist
Installer Checklist
Fast Track for Installing the Stacked Washer/Dryer
1 Position Unit Near Installation Area. 7 Connect Dryer Exhaust
System.
SWD997N_SVG1
CHECK CHECK
2 Remove the Shipping Ma-
terials and Install Plugs.
FLW2359N_SVG
8 Position and Level the
Washer.
SWD1056N_SVG1
CHECK CHECK
3 Connect Fill Hoses.
FLW2304N_SVG
COLD
HOT
9 Wipe Out Inside of
Washer and Dryer
Drums.
SWD1054N_SVG
CHECK CHECK
4 Connect Drain Hose to
Drain Receptacle.
SWD1010N_SVG1
10 Plug In Washer and
Dryer.
DRY2669N_SVG
CHECK CHECK
5 GAS ONLY
• Connect Gas Supply
Pipe.
• Check for Gas Leaks.
D233I_SVG1
11 Recheck Steps.
CHECK CHECK
6 ELECTRIC ONLY - Con-
nect Electrical Cord
D679I_SVG1
12 Start and Run Dryer in Heat Setting to Verify Dryer is
Heating.
CHECK CHECK
Refer to the manual for more detailed information
Installer Checklist
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
30 Part No. 807638EN