User's Guide for Dryers Original Instructions Keep These Instructions for Future Reference. CAUTION: Read the instructions before using the machine. (If this machine changes ownership, this manual must accompany machine.) www.alliancelaundry.com Part No.
WARNING DRY979N CAUTION Hazardous voltage inside. Disconnect power before servicing. A clothes dryer produces combustible lint. To reduce the RISK OF FIRE, dryer MUST BE EXHAUSTED OUTDOORS. FOR GAS MODELS To reduce the risk of accumulating unsafe concentrations of combustion gasses, the dryer MUST BE EXHAUSTED OUTDOORS. Read all instructions before using unit.
WARNING • • • WARNING To reduce the risk of severe injury or death, follow all installation instructions. Save these instructions. Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. WHAT TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Clear the room, building or area of all occupants. • Immediately call your gas supplier from a neighbor’s phone.
Product Registration Product Registration New owners of Alliance Laundry Systems equipment are encouraged to register their appliance to insure proper limited warranty coverage. Register online at http://www.speedqueen.com/home/en-us/support/product-registration.aspx or contact your dealer to register your appliance. All information will be kept confidential and will not be distributed to other parties. For Canadian customers, use http://home.huebsch.com/prodreg/ to register your product.
Table of Contents Product Registration............................................................................... 5 Safety Information...................................................................................7 Explanation of Safety Messages.....................................................................7 Important Safety Instructions......................................................................... 7 Before Drying.....................................................................
Safety Information Safety Information • Read all instructions before using the dryer. • Install this dryer according to the INSTALLATION INSTRUCTIONS. Refer to the EARTH/GROUND INSTRUCTIONS in the INSTALLATION manual for the proper earth/ground connection of the dryer. All connections for electrical power, earth/ ground and gas supply must comply with local codes and be made by licensed personnel when required. Do not do it yourself.
Safety Information • Use the dryer only for its intended purpose, drying clothes. ALWAYS follow the fabric care instructions supplied by the garment manufacturer and only use the dryer drum to dry textiles that have been washed in water. • Always read and follow manufacturer’s instructions on packages of laundry and cleaning aids. Heed all warnings or precautions. To reduce the risk of poisoning or chemical burns, keep them out of reach of children at all times (preferably in a locked cabinet).
Before Drying Before Drying 1. Sort by color. 2. Separate lint shedding fabrics and lint receiving fabrics. Towels, flannels, chenille, cottons, rugs, etc., shed lint. Corduroys, knits (including socks), permanent press, and synthetics attract lint. 3. Separate no heat, low heat and high heat items. Energy Saving Tips • • • • • • • • • • Make sure the lint filter is always clean. Do not overload the dryer. Do not overdry items. Remove items to be ironed while still damp.
Before Drying Cylinder with wet permanent press items D666I_SVG © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 10 Part No.
Operating Your Dryer Operating Your Dryer Auto-Sensing WARNING To reduce the risk of fire, electric shock, serious injury or death to persons, read the Safety Information section before operating the dryer. W520 The Auto-Sensing drying cycle operation is determined by the type of cycle selected as well as the moisture sensing system, which can be set by changing the Dryness setting. Auto-Sensing cycles are Energy Saver cycles that help prevent over-drying.
Operating Your Dryer Favorite Dryness The Favorite cycle keypad allows the user to save different cycles, selections and options for later use. Nine favorite cycles can be saved. Press the Dryness keypad to change the dryness level in an Auto-Sensing cycle. Choose from Damp, Less Dry, Near Dry or Dry. 1. Press the Favorite keypad. The control will display the cycle and modifier settings for the first Favorite cycle. The 2-digit display will switch between F1 and the cycle time for the selected cycle.
Operating Your Dryer Signal (on select models only) Pressing the Signal keypad will change the end of cycle signal volume. There are four settings: Off, Low, Medium, High. If the Anti-Wrinkle option is selected the signal will sound each time the dryer tumbles. Control Lock (Secure keypad) Pressing and holding the Signal keypad for three seconds will turn on the Control Lock. The Control Lock status light will be lit. While Control Lock is on, no other keypad presses are allowed.
Operating Your Dryer Status 1 The Status lights are lit during the cycle to show what part of the cycle is running. Door Open The Door Open status light is lit any time that the dryer door is open. Heating The Heating status light is lit to indicate that a heat portion of the cycle is currently operating. Cooling The Cooling status light is lit during the cool-down portion of the cycle. Extended The Extended status light is lit during the Anti- Wrinkle cycle extension.
Operating Your Dryer The drying rack can be used in manual cycles only for no-tumble drying of articles such as tennis shoes, sweaters, stuffed toys or other delicate items. D668IE0A 5. If not already on (control lights will be lit), turn on the dryer by pressing the Power/Cancel button. NOTE: You will not be able to press the Start/Pause button to Pause the cycle until the motor is running.
Maintenance Maintenance Lubrication WARNING All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary. Do not lubricate the door hinge. If the hinge makes noise, replace the hinge. Care of Your Dryer WARNING To reduce the risk of an electric shock, serious injury or death, disconnect the electrical service to the dryer before cleaning the interior.
Maintenance 1 DRY2782N_SVG 1. Lint Filter Figure 2 IMPORTANT: The lint filter must be in place in the door opening when using dryer or loading and unloading dryer. If the filter is not in place, clothing could fall into the front air duct and get into the exhaust system, causing damage to the motor. © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 17 Part No.
Troubleshooting Troubleshooting Try these troubleshooting tips before making a service call. They may save you time and money. Dryer Symptom Dryer won’t start Possible Cause/Solution • • • • • • • • • • • • Dryer won’t heat Metered models - Insert coin(s). Metered models - Activate timer. Push coin slide all the way in. Insert coin(s) or card, if required. For dryers equipped with a power cord, make sure the power cord is plugged all the way into the electrical outlet.
Troubleshooting Dryer Symptom Possible Cause/Solution Dryer doesn’t dry clothes satisfactorily • Check exhaust duct to outside to see if it is kinked, blocked or needs cleaning. • Check weather hood to make sure flapper moves freely, has not been pushed in or has not been blocked. • Auto-Sensing cycle – Adjust Dryness selection. • Manual cycle - Allow more or less time. • Clean the lint filter. • Make sure the load isn’t too small. Small loads may not tumble properly or dry evenly.
Troubleshooting We would like to point out items that would not be considered a product failure and are not covered under warranty. If a service technician is called for the items listed below you will be responsible for payment of the service call. • • • • • • Plugged or restricted venting Kinked venting Cleaning lint from within the dryer Home electrical issues Home gas issues Foreign objects found inside the dryer © Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT 20 Part No.
Troubleshooting Contact Information If service is required, contact the nearest Factory Authorized Service Center. To find the nearest service center, visit us online at www.speedqueen.com. If service is required, contact the nearest Factory Authorized Service Center. To find the nearest service center, visit us online at ca.speedqueen.com. If service is required, contact the nearest Factory Authorized Service Center.
Troubleshooting If replacement parts are required, contact the source from where you purchased your washer or visit us online at www.speedqueen.com. If replacement parts are required, contact the source from where you purchased your washer or visit us online at ca.speedqueen.com. If replacement parts are required, contact the source from where you purchased your unit or call +1 (920) 748-3950 for the name and address of the nearest authorized parts distributor.
